Our range of alcohol aroma dispensers specifically suits the preservation of small and large format baked goods (croissants, panettone, etc.)
and have two main features:
• can draw the fluid directly from non-pressurised common tanks
• insert the correct dose directly in the package without the product being dispersed in the environment
The RPM EASY aroma dispenser is a device for dispensing fluid aromas, even alcoholic, extremely simple to install and use. The food material piston pump sucks the fluid from the tank and pressurises it to 3 bar through the 4 mm diameter nozzle with extremity micro-holes. This device, suitably fitted to the machine, inserts the correct quantity of aroma in the package without the product being dispersed in the environment. Control over the quantity of fluid to be inserted in the package gets set via the front instrument equipped with a large digit display.
NOTE: it does not need compressed air and its tank is not pressurised.
No aromatic mists get dispersed in the environment.
Very competitively priced.
Power supply: 220-240V 1A. 24V AC/DC
Tank: 5 litres (standard)
Nozzle: 4 mm diameter, length up to 3000 mm
The RPM STANDARD aroma dispenser is a device for dosing fluid aromas, even alcoholic, extremely simple to install and use. A standard feature of the dispenser is an indicator of low fluid/alcoholic aroma level which, through a sensor will indicate its reserve or absence.
The pressurising circuit consisting of the pneumatic pump maintains pressure from 2 up to 4 bar, according to need, a minimum quantity of fluid (approx. 100ml) which will then be dispensed on synchronising signal incoming from the packaging machine, and with quantity that can be set on the instrument mounted on the front.
The injection of the fluid/alcoholic aroma will take place by being directly sprayed on the product or, without being dispersed in the environment, directly inside the package through a specific 4 mm diameter steel nozzle, with extremity micro-holes.
NOTE:
• a pressurised tank is not needed.
• minimal maintenance required.
• no aromatic mists get dispersed in the environment.
• Absolute dispensing precision.
Electrical power supply: 220 – 240 Volt 1st / option 24VDC.
24 Volt AC/DC signals.
6 Bar pneumatic supply
Max. consumption: 60 litres/hour.
4 mm diameter nozzle, length up to 3000 mm.
Fluid / alcoholic aroma dispenser with the same features as those of the Standard type dispenser,
in which the setting of the dosing parameters gets done directly from the packaging machine's touch screen.
Three-side sealed flow-packaging
Three-side sealed packaging
Ours is a handcraft business in the world of automatic flexible packaging and have been enthusiastically involved in our work for over two decades. We help you in the packaging of your products, creating new flow-packaging machines or improving the productive process of existing machines and plants, because we believe in the intrinsic value of each single packaging machine.
